Super Fine Sprayable Metal Polish for Polished Surfaces and Diamond Plate, 24 Ounce Haze Removal

This sprayable metal polish refreshes polished surfaces by removing light haze, minor imperfections and water spots. Renegade's Q16 uses super fine abrasives for finishing work on wheels, tanks and other polished metal surfaces.

The spray formula also suits diamond plate, where it cuts through surface contaminants without caking up or hardening. Clean the surface first, shake well and apply the polish with a microfiber pad or towel. Work it in thoroughly, allow about 30 seconds for a haze to develop, then remove it with a clean microfiber towel. Follow the surface's mill lines with linear motions.

Features

• Super fine abrasives help remove light haze, imperfections and water spots.
• Sprayable formula offers convenient application for on-the-go polishing.
• Suitable for polishing diamond plate without caking up or hardening.
• Apply with a microfiber pad or towel and finish with a clean microfiber towel.

Specifications

• Product: Q16 Super Fine Sprayable Metal Polish
• Size: 24 Ounce
• Formula: Sprayable metal polish with fine abrasives
• Applications: Polished metal surfaces and diamond plate
• Preparation: Clean the surface and remove surface contaminants; shake well before use
• Drying step: Allow about 30 seconds until a haze develops
• Finishing method: Remove polish with a clean microfiber towel
• Recommended motion: Linear motions following the surface's mill lines

Frequently Asked Questions

Can this metal polish be used on diamond plate?

Yes. Q16 is suitable for polishing diamond plate, and its spray formula is designed to work through surface contaminants without caking up or hardening.

What marks does Q16 help remove from polished metal?

Q16 helps remove light haze, minor imperfections and water spots from polished surfaces. Its fine abrasives are intended for this finishing work.

How do I apply and remove the polish?

Apply Q16 to a microfiber pad or towel, work it thoroughly into the cleaned surface and wait about 30 seconds until a haze develops. Remove the polish with a clean microfiber towel, using linear motions that follow the mill lines.

Should I clean the metal before polishing?

Yes. Thoroughly clean the surface and remove surface contaminants before using Q16. Shake the polish well before application.

How can I help preserve the finish after polishing wheels or tanks?

Apply a separate protective coating after polishing wheels or tanks to help protect the finish and prolong its shine.