Satin Chrome Prismatic Red Vinyl Wrap Film for Vehicle Panels, Full Car Wraps and Interior Trim in Multiple Roll Sizes
Satin Chrome Prismatic Red Vinyl Wrap Film for Vehicle Panels, Full Car Wraps and Interior Trim in Multiple Roll Sizes
Satin Chrome Prismatic Red Vinyl Wrap is a deep cherry red vehicle wrap film with a satin metallic finish and soft, even glow. Sunlight brings out a brighter red while shaded areas appear deeper cranberry because the metallic flake responds to light; it is not a chameleon color-shifting finish.
The polymeric calendared film stretches over vehicle contours without cracking when installed correctly, and its satin surface is described as more forgiving than mirror or opal chrome during stretching. Use it for exterior panels, complete car wraps, or interior trim. The repositionable acrylic adhesive and built-in air-release channels support a clean installation.
Choose the roll length that fits your project. Available options are 5ft x 59ft, 5ft x 49ft, 5ft x 33ft, 5ft x 16ft, 5ft x 10ft, and 5ft x 3.3ft. Screen colors and finishes are approximate, so check a physical color swatch for the closest representation.
Features
- Deep cherry red satin metallic appearance with no mirror shine
- Brighter red in direct sun and deeper cranberry tone in shade
- Medium-stretch film rated up to 30% maximum stretch
- Air-release channels support bubble-free application
- Slideable, repositionable acrylic-based adhesive
- Suitable for exterior panels, full vehicle wraps and interior trim
- Water and weather resistant with stated heat and UV resistance
- Recommended application temperature: +20°C to +30°C
- Service temperature range: -50°C to +110°C
- Post-heating guidance: 110°C on flat surfaces and 130°C on curves and overlaps
Specifications
- Product type: Vehicle wrap vinyl film
- Color: Prismatic red / deep cherry red
- Finish: Satin metallic; opaque surface
- Material: High-grade PVC polymeric calendared vinyl film
- Adhesive: Solvent-based acrylic adhesive
- Film thickness: 130 ± 2% µm
- Glue thickness: 30 ± 2% µm
- Plastic liner thickness: 130 ± 2% µm plastic
- Roll width: 1520 ± 0.01 mm (5 ft)
- Available roll lengths: 59 ft, 49 ft, 33 ft, 16 ft, 10 ft, or 3.3 ft
- Maximum stretch: 30%
- Application temperature: +20°C to +30°C
- Service temperature: -50°C to +110°C
- Shelf life: 2 years when stored at +10°C to +20°C, 50% relative humidity, in the original package away from direct sunlight
- Recommended care: Use pH-neutral products; avoid wax or solvents
- Use-by guidance: Use within 3 months after receiving the wrap film
Frequently Asked Questions
What does the prismatic red finish look like?
It is a deep cherry red with a satin metallic glow. Direct sun makes the red look brighter, while shade gives it a deeper cranberry tone; it does not shift hue like a chameleon finish.
Which roll sizes are available?
The available sizes are 5ft x 59ft, 5ft x 49ft, 5ft x 33ft, 5ft x 16ft, 5ft x 10ft, and 5ft x 3.3ft.
Can this film cover curved vehicle panels?
Yes. The film is described as medium stretchable up to 30% and suitable for contours when installed with standard calendered-film methods without overstretching or overheating.
How should the wrap be applied?
Apply it at +20°C to +30°C using standard calendered-film methods, then post-heat flat surfaces to 110°C and curves or overlaps to 130°C as specified.
How should the finished wrap be cleaned?
Use pH-neutral care products and avoid wax or solvents. Screen colors are approximate, so compare a physical swatch when color accuracy matters.