High Temperature Magnet Sheet for 3D Printer Flex Plates with Pre-Applied Adhesive and 1.0 mm Thickness

This high temperature magnet sheet provides a strong magnetic base for 3D printer flex plates. Pre-applied adhesive on one side lets you attach the sheet to an aluminum plate, making it a practical choice when assembling a flex plate setup.

Made in Germany by Schallenkammer Magnetsysteme, the 1.0 mm sheet uses anisotropic multipole magnetization for strong holding force. It supports continuous operation up to 120°C and short-term exposure up to 200°C, so you can select it around your printing setup's temperature requirements.

Features

• Strong magnetic holding force for 3D printer flex plates.
• Pre-applied adhesive on one side for attachment to an aluminum plate.
• Maximum continuous operating temperature of 120°C; short-term exposure up to 200°C.
• Anisotropic magnetization in a predetermined direction provides higher holding force than regular isotropic magnets.
• Seven square sizes from 125 × 125 mm to 605 × 605 mm.

Specifications

• Product form: Anisotropic multipole magnet sheet
• Thickness: 1.0 mm
• Maximum continuous operating temperature: 120°C
• Short-term operating temperature: Up to 200°C
• Adhesive: Pre-applied on one side
• Size variants: 125 × 125 mm; 165 × 165 mm; 185 × 185 mm; 255 × 255 mm; 305 × 305 mm; 355 × 355 mm; 605 × 605 mm
• Remanence Br: 243–263 mT
• Coercive field strength HcB: 179–203 kA/m
• Coercive field strength HcJ: 211–257 kA/m
• Energy product (W×H)max.: 11.1–13.5 kJ/m³
• Adhesive force: Approximately 130 g/cm²
• Country of manufacture: Germany

Frequently Asked Questions

Is this a complete flex plate or the magnetic base?

This product is the adhesive-backed magnetic sheet used as a base for a 3D printer flex plate. It attaches to an aluminum plate.

Can this magnet sheet operate continuously at 200°C?

No. This magnet sheet has a maximum continuous operating temperature of 120°C; 200°C is its short-term limit.

Do I need to apply adhesive separately?

The magnet sheet already has adhesive pre-applied to one side for installation onto an aluminum plate.

Which magnet sheet size should I choose?

Choose the square size that matches the dimensions required by your flex plate setup. Sizes are 125, 165, 185, 255, 305, 355 and 605 mm per side; the sheet thickness is 1.0 mm.