6.5-Inch Coaxial Car Speakers, Pair Rated at 150W RMS with Silk-Dome Tweeters and Fiberglass Cones

These 6.5-inch coaxial car speakers combine a woofer and silk-dome tweeter in each speaker for full-range music playback in your car. The CT Sounds Meso pair handles 150W RMS in total, giving you a clear power rating to use when planning your car audio system.

Fiberglass cones and nitrile butadiene rubber surrounds form the woofer assemblies, while 25mm silk-dome tweeters handle higher frequencies. Included speaker grilles, wire and screws help you prepare for installation; check the 5.56-inch cutout and 2.78-inch mounting depth against your available space before fitting.

Features

• 2-way coaxial construction combines woofer and tweeter reproduction in each speaker.
• Power handling is 75W RMS and 150W maximum per speaker, or 150W RMS and 300W maximum for the pair.
• Fiberglass woofer cones use nitrile butadiene rubber surrounds.
• 25mm silk-dome tweeters feature CCAW wire voice coils and neo magnets.
• Push terminals provide speaker-wire connection points.
• Silver chrome-plated ring speaker grilles, wire and screws are included.

Specifications

• Package: Pair of 6.5-inch 2-way coaxial car speakers
• RMS power handling: 75W per speaker; 150W per pair
• Maximum power handling: 150W per speaker; 300W per pair
• Voice coil configuration: Single 4-ohm
• Woofer voice coil: 1.4-inch EISV
• Woofer cone: Fiberglass
• Surround: Nitrile butadiene rubber
• Spider: Nomex blend
• Basket: Stamped steel
• Woofer magnet: 21 oz ferrite
• Woofer frequency response: 45 Hz–20 kHz
• Woofer output SPL: 90 dB at 1W/1m
• Crossover point: 4.5 kHz
• Tweeter: 25mm silk dome
• Tweeter magnet: Neo
• Tweeter frequency response: 1500 Hz–20 kHz
• Tweeter output SPL: 92 dB at 1W/1m
• Crossover circuit: 2.2 μF capacitor / 100 V
• Tweeter filter: 6 dB
• Overall diameter: 6.65 inches
• Cutout diameter: 5.56 inches
• Mounting depth: 2.78 inches
• Overall height: 3.01 inches
• Included accessories: Speaker grilles, wire and screws

Frequently Asked Questions

Does the 150W RMS rating apply to each speaker or the pair?

The pair handles 150W RMS in total, with each speaker rated at 75W RMS. Maximum power handling is 150W per speaker and 300W for the pair.

What measurements should I check before installing these speakers?

These speakers require a 5.56-inch cutout and 2.78 inches of mounting depth. Also check clearance for the 6.65-inch overall diameter and 3.01-inch overall height.

Are the tweeters included in the speakers?

Yes, each 2-way coaxial speaker includes a 25mm silk-dome tweeter alongside its woofer, so the tweeter is part of the speaker assembly.

What comes with the speaker pair?

The speaker pair includes silver chrome-plated ring speaker grilles, wire and screws for installation.

What impedance should I account for when choosing an amplifier?

These coaxial speakers have a single 4-ohm voice coil configuration and handle 75W RMS each. Check your amplifier's output rating and supported speaker load when planning the connections.